JVC V25U Startup Guide - Page 23

Network Settings IP Address Settings Setting the IP address for VN-V25U There are two methods to set the IP address for VN-V25U as follows. (A) Assigning an IP address to VN-V25U from the DHCP server (B) Assigning a static IP address to VN-V25U Ⅵ (A) Assigning an IP address from the DHCP server ● VN-V25U is set to ADHCP EnableB (the DHCP client feature is on) by default. To assign an IP address from the DHCP server, connect VN-V25U to LAN with DHCP server, and turn on VN-V25U. Allowing the DHCP server to assign the same IP address to VN-V25U every time eases access to VN-V25U. ● For details on IP addresses assigned to VN-V25U, consult your network administrator. You can look up the IP address of VN-V25U using the search tool in the supplied CD-ROM. For details, please refer to AReadmeB file in the CD-ROM. Caution: ● Set the DHCP server such that the same IP address is always assigned to the MAC address of VN-V25U by the DHCP server. Connection may fail if the above setting is not performed. Ⅵ (B) Assigning a static IP address ⅷ System configuration required for setting IP address The default setting for VN-V25U is ADHCP EnableB (DHCP client feature is turned on). Upon starting up in LAN without DHCP server, VN-V25U starts running with the following IP address after time out of DHCP. IP address : 192.168.0.2 Subnet mask : 255.255.255.0 Default gateway : Nil Note: ● To set a static IP address for VN-V25U, connect VN-V25U, the switching hub and the computer for setting using a straight LAN cable of Category 5 and above. ⅷ Set up the computer for setting the IP address. ● Minimum computer specifications for setting OS : Windows XP (Professional or Home Edition) (SP2) Web browser : Internet Explorer Version 6.0 Caution: ● When setting the IP address for VN-V25U, do so by using a network that is made up only of VN-V25U, the computer for setting and the switching hub. ● Using a hub connected to other network devices or networks via a LAN cable for setting can cause problems. 23