JVC VN-C3U VN-C3U Vnetworks camera Instruction Manual (1511KB) - Page 10

Installation and setup

Page 10 highlights

Installation and setup 1. Installation Use the optional bracket (Model VN-BK30) for installation. Make the power and network connections after completion of the installation work. Caution Install in a location with sufficient strength to prevent falling. VN-C3U units can only be installed as shown in the diagram below, or inverted. Do not install facing sideways. Tilted installation is not possible.  Attach the ceiling fixer with the 1 hole pointing toward the front of the camera.  Mount the camera body fixer on the VN-C3U.  Attach the drop-prevention wire of the ceiling fixer to the camera body fixer. drop-prevention wire  Mount the VN-C3U on the ceiling fixer by rotating clockwise, then tighten the screw of the camera body fixer. V.NETWORKS 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

11
Installation and setup
1. Installation
Use the optional bracket (Model VN-BK30) for installation.
Make the power and network connections after completion of the installa-
tion work.
Caution
Install in a location with sufficient strength to prevent falling.
VN-C3U units can only be installed as shown in the diagram below, or
inverted. Do not install facing sideways.
Tilted installation is not possible.
1
Attach the ceiling fixer with the
P
hole
pointing toward the front of the camera.
4
Mount the VN-C3U on the ceiling fixer
by rotating clockwise, then tighten the
screw of the camera body fixer.
2
Mount the camera body fixer
on the VN-C3U.
3
Attach the drop-prevention wire of the
ceiling fixer to the camera body fixer.
drop-prevention wire
V.NETWORKS