JVC VN-C3U VN-C3U Vnetworks camera Instruction Manual (1511KB) - Page 12
Alarm IN/OUT connection
View all JVC VN-C3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Alarm IN/OUT connection Connect external devices to the alarm IN/OUT as shown below. Sensor insert button External device OUT 1 External device OUT 2 External device IN q Cable connection and disconnection Press the sensor insert button when connecting and disconnecting cables. After connecting or disconnecting, make sure the sensor insert button returns to its original position. q About the alarm IN/OUT connection cables • Length: use cables with a length of 50m or less. • Recommended model: UL1007, UL1015 or equivalent cable with wire equivalent to AWG #22 - AWG #18. Caution External noise may affect the alarm working properly even with a cable length of 50m or less. In such cases, it is necessary to either change to the use of shielded cable to prevent influence by noise or to change the wiring route to avoid passing close to the source of the noise. 7.$6@&+ 13 00.4.7, 5:34 PM