JVC VN-C3U VN-C3U Vnetworks camera Instruction Manual (1511KB) - Page 19

OFF/ON, Output value, Initialization, Retry, Alarm force output

Get JVC VN-C3U - V-networks Pan/tilt/zoom Camera PDF manuals and user guides View all JVC VN-C3U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Out port setting includes the following settings: OFF/ON: Determine whether or not an alarm is to be output. Output value: Determine whether the High or Low signal will be output when an alarm occurs. Enter the time for continuous signal output of selected output value (High or Low) in the text box below. Example: High 100ms The High signal will be output for 100ms. After that, the output value will change to Low. Initialization: Determine whether or not the alarm signal will be output one time when the power is turned on. h Set the values of Out port setting in accordance with the device to which the output is to be sent. Retry: Determines the number of retries (1 - 3) to be made when alarm input arrives. Alarm force output: Press the Output button for compulsory alarm output from the camera alarm Out port in accordance with the current alarm Out port settings. This can be used for checking devices connected to the output port.  7.$6@&+ 20 00.4.7, 5:34 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
20
Out port setting includes the following settings:
OFF/ON:
Determine whether or not an alarm is to be output.
Output value:
Determine whether the High or Low signal will be output
when an alarm occurs. Enter the time for continuous signal output of
selected output value (High or Low) in the text box below.
Example: High 100ms
The High signal will be output for 100ms. After that, the output
value will change to Low.
Initialization:
Determine whether or not the alarm signal will be output
one time when the power is turned on.
Set the values of Out port setting in accordance with the device to which
the output is to be sent.
Retry:
Determines the number of retries (1 - 3) to be made when alarm
input arrives.
Alarm force output:
Press the Output button for compulsory alarm output
from the camera alarm Out port in accordance with the current alarm Out
port settings. This can be used for checking devices connected to the output
port.
VM-C3U_E.65J
00.4.7, 5:34 PM
20