JVC VN-C3U VN-C3U Vnetworks camera Instruction Manual (1511KB) - Page 37
Relay alarm setting
![]() |
View all JVC VN-C3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Relay alarm setting The Relay Alarm Setting determines the actions to be performed when an alarm signal is received from Alarm 1 and Alarm 2 input of VN-C3U. There are two functions; Play a wave file and execute a program file. (Refer to page 39) Make sure to select "ON" in Relay Alarm Setting of V.NETWORKS setup tool (refer to page 21) to enable these Relay Alarm setting in this page. Caution • When a large wave file (*.wav) is selected, the alarm operation may be delayed depending on the PC specifications. Try to select a relatively small wave file. • In order to enable the Alarm 1, Alarm 2 and/or Relay Alarm setting it is necessary to 1) Select "ON" in Alarm 1, Alarm 2 and/or Relay Alarm setting of V.NETWORKS setup tool (refer to page 21), and 2) Check ( ) Alarm reg. • When relay alarm has been set, the second alarm operations is not performed. Example: When the Relay Alarm occurs in the sequence of Alarm 1→ Alarm 2, alarms operate in the sequence of Alarm 1→ Relay Alarm and Alarm 2 does not operate at all. To enable the Alarm 1, Alarm 2 and/or Relay Alarm settings, it is necessary to check ( ) Alarm reg. 7.$6@&+ 38 00.4.7, 5:35 PM
![](/manual_guide/products/jvc-vnc3u-vnc3u-vnetworks-camera-instruction-manual-1511kb-5651057/37.png)