JVC VN-C3U VN-C3U Vnetworks camera Instruction Manual (1511KB) - Page 11
Connecting to a network
View all JVC VN-C3U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2. Connecting to a network Turn on the power of only one VN-C3U unit. When network connection is completed and the power is turned on, the VN-C3U unit will be connected to the network at the following IP address. Factory set (Default) IP address 192. 168. 0. 2 10 BASE-T cable h Use a straight cable when connecting to a hub. Use a cross cable when connecting directly to a PC. DC12V 10BASE-T Power supply connection cable - 12VDC power supply + q About the power supply connection cable • Length: 30m or less. • Recommended model: UL1007, UL1015 or equivalent cable with wire equivalent to ID AWG #20 or larger. Caution All VN-C3U units are set to the same IP address at the factory; therefore, if the power of multiple VN-C3U units is turned on at the same time, address duplication will occur and correct access will not be possible. Always turn the power on for only one unit at a time. If address duplication occurred, perform the proper processing and wait for 10 min. or more, or turn off the power of all units on the network and then turn the power on again; otherwise, correct access may not be possible. 7.$6@&+ 12 00.4.7, 5:34 PM