Jenn-Air JGRP548HL Installation Instructions - Page 22
Push down on the clip on the electrode bracket.
View all Jenn-Air JGRP548HL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6. Pull electrode out of bracket. 10. Push down on the clip on the electrode bracket. B A A B A. Grasp electrode here. B. Bracket 7. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into the gas opening, and press down onto the gas orifice spud, then remove by turning the gas orifice spud counterclockwise and lifting out. Set gas orifice spud aside. A. Oven bake burner electrode bracket B. Electrode bracket clip 11. Replace oven bake burner electrode inside bracket. B A A A. Gas orifice spud 8. Gas orifice studs are stamped with a letter and a number. Install the Number 125 oven bake burner orifice spud. 9. Place Natural gas orifice in plastic parts bag for future use, and keep with package containing literature. A. Oven bake burner electrode B. Oven bake burner electrode bracket 12. Reinstall the oven bake burner and oven bake burner screws. See Step 4 for illustration. 13. Replace oven baffle and oven baffle nuts. The front holes will be aligned, and a click will sound when baffle is seated. 22