Jensen VM9020TS Operation Manual - Page 26
Error Messages, Care and Maintenance - troubleshooting
View all Jensen VM9020TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Problem Image blurred, distorted, or dark PBC cannot be used during VCD playback No repeat or searching while playing VCD MP3 Interruption occurred during playback Incorrect playback message displayed Cause Disc is illegally copied PCB is not available on the disc PCB is on Table 18: Troubleshooting Use original disc Turn PCB off Disc is dirty or scratched File is damaged/bad recording Message is longer than LCD can display Clean disc or replace Recreate disc with good files Corrective Action Error Messages Loading No Disc Message Displayed Bad Disc Unknown disc Region Error Error Table 19: Error Messages Cause Corrective Action Disc is being read Disc is dirty Disc is upside down Disc not present in loading compartment Disc is dirty Disc is upside down Disc format is not compatible with this unit DVD is not compatible with region code of unit illegal mechanism operation Clean disc with soft cloth Insert disc with label side up Insert disc Clean disc with soft cloth Insert disc with label side up Press EJECT key for 5 seconds to reset loading mechanism Care and Maintenance 1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again. 4. Never insert anything other than a 5" (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects. 5. Do not attempt to use a 3" (8 cm) CD-Single disc in this unit, either with or without an adaptor, as damage to the player and/or disc may occur. Such damage is not covered by the Warranty on this product. 6. The CD player may not operate properly in extreme hot or cold. If such conditions occur, allow the interior of the vehicle to reach a normal temperature before using player. 7. When the vehicle warms up during cold weather or under damp conditions, condensation may appear on the LCD panel. Should this occur, the screen will not operate properly until the moisture has evaporated. 8. We suggest you use a cleaning disc in this unit more frequently than in the unit in your home due to the environmental conditions of the vehicle. 24 VM9020TS