Kenmore 33094 Owners Manual - Page 6

Materials Needed To simplify the installation, Sears has available the installation parts shown below. You may or may not need all of these materials, depending on your type of installation. .:r.'_'Jt:t:!L!! ' ///J IL! EXPANSION TANKS FOR TH ERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLONS (7,6 LITERS) AND 5 GALLONS (18,9 LITERS) CAPACITY THROUGH LOCAL SEARS STORE OR SERVICE CENTER. WATER HEATER iNSTALLATION KiT WITH FLEXIBLE CONNECTORS FOR 3/4" (19,06 ram) OR 1/2" (12,7 ram) THREADED OR COPPER PLUMBING AND FLEXIBLE WATER HEATER GAS CONNECTOR WITH FITTINGS, DRAIN PANS AVAILABLE iN 20" (506 ram) DIAMETER FOR WATER HEATERS HAVING A DIAMETER 18" (457 mm) OR LESS, 24" (610ram) DIAMETER FOR WATER HEATERS HAVING A DIAMETER 22" (559 mm) OR LESS AND AVAILABLE IN 28" (711 rnm) DIAMETER FOR WATER HEATERS HAVING A DIAMETER 26" (660 ram) OR LESS. Basic Tools You may or may not need all these tools, depending on your type of installation. These tools can be purchased at your local Sears Store. Pipe Wrenches (2) 14" (356 mm) Screwdriver Tin Snips 6' (1.82 m) Tape or Folding Ruler Garden Hose Drill Pipe Dope or Teflon Tape DRILL SLOT-HEAD SCREWDRIVER PHILLIPS SCREWDRIVER TIN SNIPS ROLL OF TEFLON TAPE (USE ONLY ON WATER CONNECTIONS) PiPE DOPE USE (SQUEEZE TUBE) FOR WATER AND CONNECTIONS GAS GARDEN HOSE 6 FOOT TAPE PIPE WRENCH Additional Tools Needed When Sweat Soldering Tubing Cutters or Hacksaw Propane Tank Soft Solder Solder Flux Emery Cloth Wire Brushes TUBING CUTTER PROPANE TORCH HACKSAW ROLL OF EMERY CLOTH 3/4" (19 ram) WIRE BRUSH 1/2" (13 ram) WIRE BRUSH ROLL OF LEAD-FREE SOFT SOLDER SOLDER FLUX