Kenmore 3314 Owners Manual - Page 3

Readandunderstainndstruction manualndsafetymessages beforeinstallinogp, eratinogr servicinthgiswatehr eater Failurteofollowinstructioannsd safetymessagceosuldresuilnt deathorseriouisnjury, Instructiomnanuaml usrtemain withwatehr eater Water temperature over 125°F (52°0) can cause severe burns instantly resulting in severe injury or death_ Children, the elderly, and the physically or mentally disabled are at highest r[skfor scald injury. Feel water before bathing or showering Temperature limiting valves are available. Read instruction manual for safe temperature setting. Fire or Explosion Hazard Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Avoid all ignition sources if you smell LP gas_ , Do not expose water heater control to excessive gas pressure. , Use only gas shown on rating plate , Maintain required clearances to combustibles_ , Keep ignition sources away from faucets after ,, extended period of nen-use. J Read instruction manual before installing, using or sewucmg water heater. Fire Hazard mtinued protection against riskof fire: ,Do ot install water heater on carl: .tted floor ,Do ot operate water heater if flood damaged. Explosion Hazard o Overheated water can cause water tankexplosion, -Properly sized temperature and pressure relief valve must be installed in opening provided. Breathing Hazard - Carbon Monoxide (}as • Install vent system in accordance with codes, • Do not operate water heater it flood damaged. • High altitude or[flee must be installed for operation above 7,700 feet (2,347 m) , Do not operate [f soot buildup. • Do not obstruct water heater air intake with insulating jacket. • Do not place chemical vapor emitting products near water heater. • Gas and carbon monoxide detectors are available Breathing carbon monoxide can cause brain damage or death, Always read and understand instruction manual improper installation and use may result in property damage. , Do not operate water heater if flood o Inspect and replace anode. o Install in location with drainage, - Fill tank with water before operation. • Be alert for thermal expansion damaged Refer to instruction manual for installation and service.