Kenmore 3693 Owners Manual - Page 21
Anyservice - reviews
View all Kenmore 3693 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Revietwhistabletofinddo-it-yourseolfutionfosrminoprerformanpcroeblemAsn. yservice needeodt,hetrhanmaintenandceescribeindthisOwnerM'sanuaslh, oulbdeperformbeyda Searosrotheqr ualifiesdervicaegent. Vacuum cleaner won't run. 1. Unplugged at wall outlet. 2. Tripped circuit breaker/blown fuse at household service panel. 3. Thermal protector tripped. 4. Defective wall outlet. Poor job of dirt pick-up. 1. Full or clogged dust bin. 2. Wrong pile height setting. 3. Worn agitator. 4. Clogged nozzle. 5. Clogged hose. 6. Hole in hose. 7. Hose not inserted fully. 8. Motor protection system activated. (change of sound) 9. Dirty filters. Vacuum Cleaner picks up moveable rugs or pushes too hard. 1. Wrong pile height setting. Light won't work. 1. Burned out light bulb. Agitator does not turn. 1. Handle in full upright position. 2. Agitator Overload tripped. 3. Thermal protector tripped. Airflow restricted with attachment use, Sound changes. 1. Attachment use restricts air flow. 2. New carpet fuzz clogged air path. Difficulty adjusting pile height setting 1. Vacuum cleaner not in proper upright position, Dirt Sensor, wilt not work 1. Dirty optic cells. 1. Plug in firmly, select the desired setting on the touch control. 2. Reset circuit breaker or replace fuse. 3. Allow vacuum cleaner to cool, then reset thermal protector. 4. Check with a good appliance/lamp, have properly serviced. 1. Empty dust bin. 2. Adjust setting. 3. Take to your nearest Sears Service Center. 4. Check for clogs. 5. Check for clogs. 6. Take to your nearest Sears Service Center. 7. Insert hose fully. 8. Check for clogs. 9. Change filters. 1. Adjust setting. 1. Change light bulb. 1. Move handle from upright position. 2. Reset Agitator Overload. 3. Allow vacuum to cool, then reset thermal protector. 1. Check attachments for fuzz, lint, pet hair or other debris. 2. Check for clogs and clean hose. 1. Place vacuum cleaner in the locked upright position, tilt the vacuum back slightly and adjust pile height. 1. Clean optic cells 21