Kenmore 3704 Owners Manual - Page 13

Warning, Remove, Replace

Get Kenmore 3704 - Bagless Upright Vacuum PDF manuals and user guides View all Kenmore 3704 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

WARNING Electrical Shock and Personal injury Hazard Disconnect electrical supply before servicing or cleaning the unit, Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. TO REMOVE BELT Lay cleaner flat and flip cleaner to expose nozzle base. To remove nozzle guard, slide lock A to unlock position, to the left. Then depress lock B to unlock nozzle guard. TO REPLACE BELT OR BRUSHROLL of brushroll without bristles. _,_ Place new belt in area shutoff pedal in "Carpet" position. Slide belt onto motor shaft. Ensure to loop _ thelacbeelbt ruasrohuronldl the belt lifter shaft. _A Rotate/pivot the pull off nozzle guard and Lift and remove brushroll. Dispose of old belt. 13 With new belt in place, pull and slide brushroll into nozzle making sure that the brushroll end caps are in the correct orientation (see diagram for end cap orientation). Rotate brushroll manually to make sure belt is properly aligned. Secure by aligning the three (3) tabs in the base slots. To reattach nozzle guard, rotate/pivot back into position. To secure nozzle guard, push lock B down to lock position. Slide lock A into lock position, to the right.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
WARNING
Electrical
Shock
and
Personal
injury
Hazard
Disconnect
electrical
supply
before
servicing
or cleaning
the
unit,
Failure
to
do
so could
result
in electrical
shock
or
personal
injury
from
vacuum
cleaner
suddenly
starting.
TO
REMOVE
BELT
Lay
cleaner
flat and flip cleaner
to expose
nozzle base. To remove
nozzle
guard,
slide
lock A to unlock
position,
to the left. Then
depress
lock
B to unlock
nozzle
guard.
_A
Rotate/pivot
the
nozzle
guard
and
pull
off
Lift and
remove
brushroll.
Dispose
of old
belt.
13
TO
REPLACE
BELT
OR
BRUSHROLL
_,_
Place
new
belt
in area
of brushroll
without
bristles.
_
lace brushroll
shutoff
pedal
in
"Carpet"
position.
Slide
belt
onto
motor
shaft.
Ensure
to loop
the
belt around
the
belt lifter
shaft.
With new belt in place,
pull and slide brushroll
into nozzle making
sure that the brushroll
end caps are in the
correct
orientation
(see
diagram
for end cap
orientation).
Rotate
brushroll
manually
to make
sure
belt is
properly
aligned.
Secure
by aligning
the
three
(3) tabs
in
the
base slots.
To reattach
nozzle
guard,
rotate/pivot
back
into
position.
To secure
nozzle
guard,
push
lock
B
down
to lock
position.
Slide
lock A
into
lock
position,
to the
right.