Kenmore 3704 Owners Manual - Page 15

Gather the cord and wrap it loosely around the upper and lower cord hooks. Lock power cord plug onto the power cord. cleaner in a dry, indoor area, on the floor with the handle locked in the upright position. Electrical Shock and Personal injury Hazard Wrapping the cord too tightly puts stress on the cord and can cause cord damage, Review this table to find do-it-yourself solutions for minor performance problems. Any service needed, other than maintenance described in this Owner's Manual, should be performed by a Sears or other qualified service agent. Disconnect electrical supply before performing maintenance to the unit. Failure to do so could result in electrical shock or personal injury. Cleaner won't run Cleaner won't pick up or low suction 1, Power cord not firmly plugged into outlet. 2. Blown fuse or tripped breaker. 3. Thermal Protector activated. 4. Needs service. 1. Dirt container not installed correctly. 2. Dirt container full. 3. Brushroll worn. 4. Belt is broken, worn or slipped out of position. 5. One or both filters clogged. 6, Carpet height setting is incorrect. 7. Hose clogged. Dust escaping from cleaner Cleaner tools won't pick-up Headlight not working Cleaner is difficult to push Performance indicator light turns red Height adjust Won't function 8. Air directors need to be cleaned. 1. Dirt container full. 2. Dirt container not installed correctly. 3. Hose not installed correctly. 4. One or both filters not installed completely. 1. Hose clogged. 2. Dirt container full. 3. One or both filters clogged. 1. Bulb burnt out. 2. Loose electrical wires. 1. Carpet height setting is incorrect. 2. Belt is broken, worn or slipped out of position. 1. Hose clogged. 2. One or both filters clogged. 3. Air directors need to be cleaned. 1. Internal breaker tripped. 2. Needs service. 1. Plug unit in firmly. 2. Check fuse or breaker in home. Replace fuse/reset breaker. 3. Allow cleaner to cool - Pg. E. 4. Take to Sears Service Center. 1. Review DIRT CONTAINER REMOVAL AND REPLACEMENT- Pg. 11,12. 2. Empty dirt container - Pg. 11. 3. Replace brushroll- Pg. 13. 4. Replace belt - Pg. 13. 5. Remove filters and clean - Pg. 11,12. 6. Set carpet height adjust to appropriate setting for carpet being cleaned - Pg. 9. 7. Check inlets, hose and dirt container for obstructions; remove obstruction - Pg. 14. If clog persists, call 1-877-839-2046. 8. Remove air directors and clean. Pg. 12. 1. Empty dirt container - Pg. 11. 2. Review DIRT CONTAINER REMOVAL AND REPLACEMENT- Pg. 11,12. 3. Review hose placement- Pg. 6. 4. Review filter removal and replacement - Pg. 11, 12. 1. Check inlets, hose and dirt container for obstructions; remove obstruction - Pg. 14. If clog persists, call 1-877-839-2046. 2. Empty dirt container - Pg. 11. 3. Clean filters - Pg. 11, 12. 1. Replace bulb - Pg. 14. 2. Take to Sears Service Center. 1. Set carpet height adjust lever to appropriate setting for carpet being cleaned - Pg. 9. 2. Replace belt - Pg. 13. 1. Check inlets, hose and dirt container for obstructions; remove obstruction - Pg. 14. If clog persists, call 1-877-839-2046. 2. Remove filters and clean - Pg. 11,12.. 3. Remove air directors and clean. Pg. 12. 1. Turn the unit off and then on to reset internal breaker. 2. Take to Sears Service Center. For any questions, please call 1-877-839-2046. 15