Kenmore 3704 Owners Manual - Page 14

Warning, To Remove, Light

Get Kenmore 3704 - Bagless Upright Vacuum PDF manuals and user guides View all Kenmore 3704 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

WARNING Electrical Shock and Personal injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. TO REMOVE LIGHT BULB 1. Disconnect power cord from elec_ical outlet. 2. Press handle release pedal and lay vacuum cleaner back. Do not use a bulb rated over 9W (13V). During extended use, heat from the bulb could overheat surrounding plastic parts. screwdriver into slot at top of the lens.Lift the 5le.nsInsceorvt erflatoblraedmeovoef. _%_._:_-- 6. Pull bulb out of socket. Do NOT twist. Gently push replacement bulb into socket to replace. 3. Grasp the edge of the exhaust cover. Pull out edges of exhaust cover and lift off. 4, Remove the two (2) screws from the lens cover. into place and secure the headlight lens by 7re.pSlancainpg letnhse ctowvoer scbreawcks. Replace exhaust cover. Note: See separate PARTS LiST for bulb number. 1. Locate the lower intake hose. 2. Rotate lower intake hose cuff clockwise into the unlock position. 3, Disconnect the hose by pulling down on the lower intake hose cuff. 4. Remove debris from inside the hose. 1. Follow instructions on page 13 for removing nozzle guard and brushroll. _ ._jl!'__ removed, locate the 2n.ozOznlecevablrvuesh(rAol)l. is A 3, Remove debris from inside the nozzle valve. 4, Return brushroll and nozzle guard. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
WARNING
Electrical
Shock
and
Personal
injury
Hazard
Disconnect
electrical
supply
before
servicing
or cleaning
the
unit.
Failure
to
do so could
result
in electrical
shock
or personal
injury
from
vacuum
cleaner
sud-
denly
starting.
TO REMOVE
LIGHT
BULB
1. Disconnect
power cord from elec_ical outlet.
2.
Press
handle
release
pedal
and
lay
vacuum
cleaner
back.
3.
Grasp
the
edge
of the
exhaust
cover.
Pull
out
edges
of exhaust
cover
and
lift off.
4,
Remove
the
two
(2) screws
from
the
lens cover.
Do
not
use
a
bulb
rated
over
9W
(13V).
During
extended
use, heat
from
the
bulb
could
overheat
surrounding
plastic
parts.
5.
Insert
flat blade
of
screwdriver
into
slot
at
top of the
lens.Lift
the
lens
cover
to remove.
_%_
._:_--
6. Pull
bulb
out
of socket.
Do NOT
twist.
Gently
push
replacement
bulb
into
socket
to replace.
7. Snap
lens
cover
back
into
place
and
secure
the headlight
lens
by
replacing
the
two
screws.
Replace
exhaust
cover.
Note:
See separate
PARTS
LiST
for bulb
number.
1. Locate
the lower
intake
hose.
2.
Rotate
lower
intake
hose cuff clockwise
into the
unlock
position.
3, Disconnect
the
hose by
pulling
down
on the
lower
intake
hose cuff.
4. Remove
debris
from
inside
the hose.
1. Follow
instructions
on page
13 for
removing
nozzle
guard
and
brushroll.
2. Once
brushroll
is
removed,
locate
the
nozzle
valve
(A).
_
._jl!'__
A
3, Remove
debris
from
inside
the
nozzle
valve.
4,
Return
brushroll
and
nozzle
guard.
14