Kenmore 37115 Owners Manual - Page 12

Warning, Remove, Replace, Or Brushroll

Get Kenmore 37115 - Bagged Upright, Tan PDF manuals and user guides View all Kenmore 37115 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

WARNING Electrical Shock and Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. TO REMOVE BELT Lay cleaner flat and flip cleaner to expose nozzle base, To remove nozzle guard, use phillips screwdriver to remove the 6 screws. Arrows indicate location of screws. TO REPLACE BELT OR BRUSHROLL O \ borldushbreoltll., Dispose of _ i Lift and remove Place new belt in area of brushroll without bristles. Slide belt onto shaft, Lift the nozzle guard and pull off. 12 With new belt in place, pull and slide brushroll into nozzle making sure that the brushroll end caps are in the correct orientation (see diagram for end cap orientation). Rotate brushroll manually to make sure belt is properly aligned. Rotate front wheel \ assembly toward agitator, locating wheels in wheel pockets. Hold in place while replacing nozzle guard. Install 6 screws,

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
WARNING
Electrical
Shock
and
Personal
Injury
Hazard
Disconnect
electrical
supply
before
servicing
or cleaning
the
unit.
Failure
to
do
so could
result
in electrical
shock
or
personal
injury
from
vacuum
cleaner
suddenly
starting.
TO
REMOVE
BELT
Lay
cleaner
flat and flip cleaner
to expose
nozzle base, To remove
nozzle
guard,
use
phillips
screwdriver
to remove
the 6 screws.
Arrows
indicate
location
of screws.
Lift
the
nozzle guard
and pull
off.
TO
REPLACE
BELT
OR BRUSHROLL
_
i
Lift
and
remove
O\
brushroll,
Dispose
of
old belt.
Place
new
belt
in
area
of
brushroll
without
bristles.
\
Slide
belt onto
shaft,
With new belt in place,
pull and slide brushroll
into nozzle
making
sure that the brushroll
end caps
are in the
correct
orientation
(see
diagram
for end
cap
orientation).
Rotate
brushroll
manually
to
make
sure
belt
is
properly
aligned.
Rotate
front
wheel
assembly
toward
agitator,
locating
wheels
in wheel
pockets.
Hold
in
place
while
replacing
nozzle
guard.
Install
6 screws,
12