Kenmore 37115 Owners Manual - Page 15

thanmaintenance - review

Get Kenmore 37115 - Bagged Upright, Tan PDF manuals and user guides View all Kenmore 37115 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Revietwhistabletofinddo-it-yoursseollfutionfosrminopr erformanpcreoblemAsn. y servicneeedeodt,hetrhanmaintenandceescribeindthisOwnerM'sanuaslh, ouldbe performebdyaSearosrotheqr ualifiesdervicaegent, WARNING nnect electrical supply before performing maintenance to the unit. e to do so could result in electrical shock or personal injury. Cleaner won't run Cleaner won't pick up or low suction Dust escaping from cleaner Cleaner tools won't pick-up 1. Power cord not firmly plugged into outlet. 2. Blown fuse or tripped breaker 3. Thermal Protector activated. 4. Needs service. 1. Bag is full, 2. Brushrollworn. 3. Broken or worn belt. 4. One or both filters clogged. 5. Carpet height setting is incorrect. 6. Brush roll feature turned off, 1. Bag is full. 2. Bag is not installed correctly. 3. Hose not installed correctly. 4. One or both filters not installed completely, 1. Hose clogged. Headlight not working Cleaner is difficult to push Brushroll light turns on Full bag indicator light turns red 2. Bag is full, 3. One or both filters clogged. 1. Bulb burnt out, 2. Loose electrical wires, 1. Carpet height setting is incorrect. 2. Broken or worn belt. 3. Brush roll feature turned off, 1. Brush roll jammed, 2. Needs Service. 1. Hose clogged. Height adjust won't function 2. Bag is full. 1. Needs service. Plug unit in firmly. Check fuse or breaker in home. Replace fuse/reset breaker. 3. Allow cleaner to cool - Pg. 5. 4. Take to Sears Service Center. 1. Replace bag- Pg, 11. 2. Replace brushroll - Pg, 12. 3. Replace belt - Pg, 12, 4. Remove filters and clean - Pg, 11, 5. Set carpet height to appropriate setting for carpet being cleaned - Pg. 9. 6. Cycle brush roll control switch - Pg. 9. 1. Replace bag - Pg. 11. 2. Review BAG REMOVAL AND REPLACEMENT - Pg. 11. 3. Review hose placement - Pg. 6. 4. Review filter removal and replacement - Pg. 11. 1. Check inlets and hose for obstructions; remove obstruction - Pg. 14. If clog persists, call 1-877-839-2046. 2. Replace bag- Pg. 11. 3. Clean filters - Pg. 11. f. Replace bulb - Pg. 13. 2. Take to Sears Service Center. 1. Set carpet height to appropriate setting for carpet being cleaned - Pg. 9. 2. Replace belt - Pg. 12. 3. Cycle brush roll control switch - Pg. 9. f. Remove jam, cycle power switch - Pg. 12, 9. 2. Take to Sears Service Center. 1. Check inlets and hose for obstructions; remove obstruction - Pg. 14. If clog persists, call 1-877-839-2046. 2. Replace bag - Pg. 11. 1. Take to Sears Service Center. For any questions, please call 1-877-839-2046. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
Review
thistable
tofinddo-it-yourself
solutions
forminor
performance
problems.
Any
service
needed,
other
thanmaintenance
described
inthisOwner's
Manual,
shouldbe
performed
byaSears
orother
qualified
service
agent,
WARNING
nnect
electrical
supply
before
performing
maintenance
to the
unit.
e to do so could
result
in electrical
shock
or personal
injury.
Cleaner
won't
run
1.
Power
cord
not
firmly
plugged
into
outlet.
2.
Blown
fuse
or tripped
breaker
3.
Thermal
Protector
activated.
3.
4.
Needs
service.
4.
Cleaner
won't
pick
1.
Bag
is full,
1.
up
or
low
suction
2.
Brushrollworn.
2.
3.
Broken
or worn
belt.
3.
4.
One
or both
filters
clogged.
4.
5.
Carpet
height
setting
is
5.
incorrect.
6.
Brush
roll
feature
turned
off,
6.
Dust
escaping
1.
Bag
is full.
1.
from
cleaner
2.
Bag
is not
installed
2.
correctly.
3.
Hose
not
installed
correctly.
3.
4.
One
or both
filters
not
installed
4.
completely,
Cleaner
tools
1.
Hose
clogged.
1.
won't
pick-up
2.
Bag
is full,
2.
3.
One
or both
filters
clogged.
3.
Headlight
not
1.
Bulb
burnt
out,
f.
working
2.
Loose
electrical
wires,
2.
Cleaner
is difficult
1.
Carpet
height
setting
is
1.
to
push
incorrect.
2.
Broken
or worn
belt.
2.
3.
Brush
roll
feature
turned
off,
3.
Brushroll
light
1.
Brush
roll jammed,
f.
turns
on
2.
Needs
Service.
2.
Full
bag
indicator
1.
Hose
clogged.
1.
light
turns
red
2.
Bag
is full.
2.
Height
adjust
1.
Needs
service.
1.
won't
function
Plug
unit
in firmly.
Check
fuse
or breaker
in
home.
Replace
fuse/reset
breaker.
Allow
cleaner
to cool
- Pg. 5.
Take
to
Sears
Service
Center.
Replace
bag-
Pg,
11.
Replace
brushroll
- Pg,
12.
Replace
belt
- Pg, 12,
Remove
filters
and
clean
- Pg,
11,
Set carpet
height
to
appropriate
setting
for
carpet
being
cleaned
- Pg.
9.
Cycle
brush
roll
control
switch
- Pg.
9.
Replace
bag
- Pg.
11.
Review
BAG
REMOVAL
AND
REPLACEMENT
- Pg.
11.
Review
hose
placement
- Pg. 6.
Review
filter
removal
and
replacement
-
Pg.
11.
Check
inlets
and
hose
for
obstructions;
remove
obstruction
- Pg.
14.
If clog
persists,
call
1-877-839-2046.
Replace
bag-
Pg.
11.
Clean
filters
- Pg.
11.
Replace
bulb
- Pg.
13.
Take
to
Sears
Service
Center.
Set carpet
height
to
appropriate
setting
for
carpet
being
cleaned
- Pg. 9.
Replace
belt
- Pg. 12.
Cycle
brush
roll
control
switch
- Pg.
9.
Remove
jam,
cycle
power
switch
- Pg.
12,
9.
Take
to
Sears
Service
Center.
Check
inlets
and
hose
for
obstructions;
remove
obstruction
- Pg.
14.
If clog
persists,
call
1-877-839-2046.
Replace
bag
- Pg.
11.
Take
to
Sears
Service
Center.
For
any
questions,
please
call
1-877-839-2046.
15