Kenmore 4102 Use and Care Guide - Page 40

desired, change, Example, 30°F

Page 40 highlights

Self-Cleaning iNSTRUCTiONS PRESS Stopping or interrupting a Self-Cleaning Cycle If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven: 1. Press Q. @ 2. Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED'" icon is no longer displayed, the oven door can then be opened (Figure 1). Note: Self-Clean cycle can never be set to start more than 12 hours in advance. DISPLAY Figure 1 Adjusting Oven Temperature The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed. Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature or the Broiltemperature. iNSTRUCTiONS To adjust the oven temperature higher 1. Press \B_k_,)for 6 seconds (Figure 2). 2. To increase the temperature use the number pads to enter the desired change (Example 30°F) (_@ (Figure 3). The temperature may be increased as much as 35°F (19°C). 3. Press to accept the temperature change and the display will PRESS 0@ ;:START' or return to the time of day (Figure 4). Press _ change if necessary• to reject the To adjust the oven temperature lower 1 Press/'B_ke''' for 6 seconds• 0 ° will appear in the display (Figure 5). • \ ,/ 2. To decrease the temperature use the number pads to enter the desircehdan{gEexam-p3l0e°F/@@ andthenpres@s (Figure 6). The temperature may be decreased as much as 35°F (19°C). 3. Press : _STA_Rt,_o accept the temperature change and the display will Q@ @ or Q return to the time of day (Figure 7). Press _ change if necessary. to reject the Note: The oven temperature adjustments are permanent and will stay forever in the unit memory unless you manually change it again. Even a power outage will not reset these changes. Follow the same procedure again if you wish to change it to a different setting. 40 DISPLAY Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Self-Cleaning
iNSTRUCTiONS
PRESS
DISPLAY
Stopping
or interrupting
a
Self-Cleaning
Cycle
If it becomes
necessary
to stop or interrupt a self-cleaning
cycle
due to
excessive
smoke or fire in the oven:
1. Press Q.
2.
Once the oven has cooled down for approximately
1 HOUR and
the "DOOR LOCKED'" icon is no longer displayed,
the oven
door can then be opened (Figure 1).
Note: Self-Clean
cycle can never be set to start more than 12 hours in advance.
@
Figure 1
Adjusting
Oven Temperature
The temperature
in the oven has been pre-set at the factory. When first using the oven,
be sure to follow recipe times and temperatures.
If you think the oven is cooking too hot
or too cool for the temperature
you select, you can adjust the actual oven temperature
to be more or less than what is displayed.
Before adjusting,
test a recipe by using a
temperature
setting that is higher or lower than the recommended
temperature.
The
baking results should help you to decide how much of an adjustment
is needed.
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature
or the
Broiltemperature.
iNSTRUCTiONS
To adjust
the
oven
temperature
higher
1.
Press \B_k_,)for 6 seconds
(Figure 2).
2.
To
increase
the temperature
use the number pads to
enter
the
desired change (Example 30°F) (_@
(Figure 3). The
temperature
may be
increased
as much as 35°F (19°C).
3.
Press
to accept the temperature
change and the display will
return to the time of day (Figure
4). Press _
to reject the
change if necessary•
To adjust
the
oven
temperature
lower
1
Press/'B_ke''' for 6 seconds• 0 ° will appear in the display
(Figure 5).
\
,/
2.
To decrease the temperature
use the number pads to
enter
the
desired
change
{Example
-30°F/@
@
and
thenpress
@
(Figure 6). The temperature
may be decreased
as much as 35°F
(19°C).
3.
Press
: _STAR_
_,
to accept the temperature
change and the display will
return to the time of day (Figure
7). Press _
to reject the
change if necessary.
Note: The oven temperature
adjustments
are permanent
and will stay
forever in the unit memory
unless you manually
change it again. Even
a power outage will not reset these changes.
Follow the same
procedure
again if you wish to change it to a different setting.
PRESS
0@
;:START'
or
Q@
@
.....
..........
Q
or
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
40