Kenmore 4102 Use and Care Guide - Page 42

Care & Cleaning, cont'd - specifications

Page 42 highlights

General Care & Cleaning (cont'd) Ceramic Glass Cooktop Cleaning & Maintenance Consistent andpropecr ean ng essent atomaintaininygourCeramig€ assoooktop Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface (on the web visit www.sears.com for replacement cooktop cleaner, item number 40079). Buff with a non-abrasive cloth or no=scratch cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions. Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings on the cooktop surface. These marks should be removed immediately after the cooktop has cooled using the cooktop cleaning cream. Metal marks can become permanent if not removed prior to future use. Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the cooktop surface. Do not slide anything metal or glass across the cooktop. Do not use your cooktop as a cutting board or work surface in the kitchen. Do not cook foods directly on the cooktop surface without a pan. Do not drop heavy or hard objects on the glass cooktop, because they may cause it to crack. Cleaning Recommendations for the Ceramic Glass Cooktop [_ Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL. / J J _chemically damaDgOe NthOeTcuesraemaiccogolakstosp sculrefacnee.r on a hot cooktop. The fumes can be hazardous to your health, and can For light to moderate soil: Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a non-abrasive plastic type no-scratch cleaning pad to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no residue. For heavy, burned on soil: Apply a few drops of CookTop® Cleaning Creme directly to the soiled area. Rub the soiled area using a non-abrasive plastic type no=scratch cleaning pad, applying pressure as needed. Do not use the pad you use to clean the cooktop for any other purpose. If soils remain, carefully scrape soils with a metal razor blade scraper, holding scraper at a 30 degree angle to the surface. Remove loosened soils, then apply a few drops of cleaning cream and buff surface clean. IMPORTANT NOTE: Damage to the ceramic glass cooktop may occur if you use an abrasive type scratch pad. Only use cleaning products that have been specifically / designed for ceramic glass cooktop. / Plastic or foods with a high sugar content: These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop sur- face) may occur if not removed immediately. After turning the surface elements OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot surface (as illustrated). Allow the cooktop to cool, and use the same method for heaw or burned on soils. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

General
Care & Cleaning
(cont'd)
Ceramic
Glass
Cooktop
Cleaning
&
Maintenance
Consistent
and
proper
c ean ng essent a
tomaintaining
yourCerami€
g assoooktop
Prior to using your cooktop for the first time, apply the recommended
CookTop® Cleaning Creme to the ceramic surface
(on the web visit www.sears.com
for replacement
cooktop cleaner, item number 40079). Buff with a non-abrasive
cloth or
no=scratch
cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream
leaves a protective
finish on the glass to help prevent scratches
and abrasions.
Sliding aluminum or copper clad bottom pans on the cooktop can cause metal
markings on the cooktop surface. These marks should be removed immediately
after the cooktop has cooled using the cooktop cleaning cream. Metal marks can
become permanent
if not removed prior to future use.
Cookware
(cast iron, metal, ceramic or glass) with rough bottoms can mark or
scratch the cooktop surface. Do not
slide
anything
metal or glass
across the
cooktop.
Do not use your cooktop as a cutting board or work surface in the kitchen.
Do not cook foods directly on the cooktop surface without a pan. Do not drop heavy
or hard objects on the glass cooktop, because
they may cause it to crack.
Cleaning
Recommendations
for
the
Ceramic
Glass
Cooktop
[_
Before
the
be
the controls
turned to OFF and the
is COOL.
/
cleaning
cooktop,
sure
are
cooktop
J
_
DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can
chemically
damage the ceramic glass surface.
J
For light to moderate
soil:
Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a non-abrasive
plastic
type no-scratch
cleaning pad to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no
residue.
For heavy,
burned
on soil:
Apply a few drops of CookTop® Cleaning Creme directly to the soiled area. Rub the soiled area using a non-abrasive
plastic type no=scratch
cleaning pad, applying pressure as needed. Do not use the pad you use to clean the cooktop for
any other purpose.
If soils remain, carefully
scrape soils with a metal razor blade scraper, holding
scraper at a 30 degree angle to the surface. Remove
loosened soils, then apply a
few drops of cleaning cream and buff surface clean.
IMPORTANT
NOTE: Damage to the ceramic glass cooktop may occur if you use an
abrasive type scratch pad. Only use cleaning products that have been specifically
designed for ceramic glass cooktop.
Plastic
or foods
with a
high
sugar content:
These types of soils need be removed immediately
if spilled or melted onto the
ceramic cooktop surface. Permanent damage (such as pitting of the cooktop sur-
face) may occur if not removed
immediately.
After turning the surface elements
OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the soil
from the hot surface (as illustrated).
Allow the cooktop to cool, and use the same
method for heaw or burned on soils.
/
/
42