Kenmore 4156 Use and Care Guide - Page 10

10 Outiis n6cessaires: ET Toumevis Phillips _' CU6 mixte de 3/8 Do Before you start: 1 Make sure the electrical power cord is unplugged 2 Remove any food from the door shelves. 3 Close the doors. from the wall outlet. To remove the hinge cover: 1 Remove the three screws from the cover over the top door hinges. 2 Pull the cover forward about a half inch and lift it off. To remove the refrigerator door: 1 Trace lightly around the door's top hinge with a pencil. This makes reinstallation easier. 2 Remove the two screws from the top hinge. Lift the door off of the bottom hinge and set it aside. 3 Remove the three bottom hinge screws and hinge, if necessary. To remove the freezer door: 1 Detach the multi-wire cable connector located above the top hinge. Grasp both sides of the connector firmly and pull apart. 2 Trace lightly around the door's top hinge with a pencil. This makes reinstallation easier. 3 Detach the water tube from the connector the freezer door. The connector releases its outer sleeve inward. located below when you press 4 Remove the screws from the top hinge and pull the multiwire cable through it. 5 Lift the door off of the bottom hinge. Lay the door on its side to avoid damage to the Remove the three bottom hinge screws and hinge, if necessary. To reinstall the refrigerator and freezer doors, reverse the above steps. SC_'eWS j