Kenmore 4156 Use and Care Guide - Page 7

7 Toe GrilleInstallation& Removal To remove the toe grille: 1 Open freezer and refrigerator compartment doors. 2 Working from left side of toe grille, slip your fingers between top of toe grille and cabinet. Gently pull forward until first set of tabs are free. Slide your hand down past the free tabs and pull forward again until the second set of tabs are free. Continue this process until all tabs are free and the toe grille can be removed. To install the toe grille: 3 Open freezer and refrigerator compartment doors. 4 Line up toe grille at base of refrigerator, making sure the four bottom tabs are resting through holes at base of cabinet. 5 Starting from left side of toe grille, press in on first top tab using your thumb toe grille forward until it snaps in place. Continue this process until all tabs aresnapped in place and toe grille is secured to refrigerator. and push Leveling All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator is equipped with adjustable front rollers to help level your unit. To ensure proper door seal and assist door closing, the refrigerator should be tilted 1/4" (6 mm), front to back. To level your refrigerator: 1 Remove toe grille (See "To remove the toe grille"). 2 Use flat-blade screwdriver or 3/8-inch socket wrench to adjust front rollers. 3 Check both doors to be sure seals touch cabinet on all four sides. The Refrigeratordoorsare designedto shutby themselveswith a 20 degreeopening.