Kenmore 4156 Use and Care Guide - Page 15

ALARM @ Air Filter On/OffButton indicatorLights 15 Using The Alarm Reset Button You can disable or activate the alarm system by pressing and holding the Reset button for three seconds. Use it, for example, to turn off audible tones and/or flashing indicator lights. The alarmsystemdoesnot automaticallyresetif you disconnectand reconnectyour refrigerator'spowercord. It canonlybe reactivatedby pressingthe AlarmResetbutton. Once you disable the alarm system, you must again press and hold the Alarm Reset button for three more seconds to reset (activate) the alarm system. The On indicator light remains off while the freezer and refrigerator compartments cool toward the current cooling settings. When temperature settings are reached, the On light displays green to indicate an active alarm system. Checking the Air FilterStatus Your refrigerator's fresh food air filter needs to be replaced from time to time. You can monitor the need for replacement by pressing and holding the Air Filter On/Off button for three seconds. To checkthe air filterstatus: 1 Press the Air Filter On/Off button. This activates a test cycle, and one of the three filter status lights displays, indicating one of the following: Filter OK Order Filter Air filter does not need changing. Air filter is about 80 percent used. Please order new one. Change Filter Air filter is 100 percent used. Please change now. 2 Press the Air Filter On/Off button to turn off the status light. Forinstructionson replacingtheair filter, see page24. COLD FREEZER COLDER X"_h Cooling System On/Off Button Turning The Cooling SystemOn And Off You can disable system's On/Off panel. the cooling system in your refrigerator by pressing the button located on the left side of the temperature control To ensure that you do not accidentally turn off the cooling system, the button does not work unless you press and hold it for three seconds. Once you disable the cooling system, all refrigeration to the freezer and refrigerator compartments stops. To turn the cooling system back on, you must again press and hold the On/Off button for three more seconds. The On/Offbutton onlycontrolsyourrefrigerator'scoolingsystem.Powerto lightsand other electricalcomponentscontinuesunlessyou unplugthepowercord.