Kenmore 4156 Use and Care Guide - Page 14

14 COLD SystemMonitoringAlarms The electronic control system continuously monitors your refrigerator/freezer for temperature consistency, doors left ajar, and power failures. Variances from normal operating conditions are communicated by audible tones and a set of four status indicator lights. AlarmReset Button IndicatorLights Eachtime you makesettingson thecontrol panel,a singleaudibletoneacknowledgesyour input. Responding to Alarms (Audible Tones & Indicator Lights) Your refrigerator's control system can convey the following information tones and the alarm indicator lights. through audible Alarm Name On Indicator Light (light is off) Audible Tones Condition Alarm system is not active while freezer and refrigerator compartments are cooling toward the current temperature settings. How To Respond If freezer and refrigerator compartments do not match your temperature settings in three hours, expect the control system to signal other conditions, if cooling does not stabilize toward your current settings call for assistance, using the phone number on the back page of this Use & Care Guide. Steady Green Door Ajar Flashing Green High Temp Flashing Amber Power Flashing Failure Amber Alarm system is active. No response required. _/" Freezer or refrigerator Close door to disable and reset alarm. door has been open for over five minutes. _ Freezer or refrigerator Press Alarm Reset button to turn off compartment has been alarm. If temperatures do not improve, too warm (45 ° F or call for assistance, using the phone higher) for over an hour. number on the back page of this Use & Care Guide. A power outage was detected, Press Alarm Reset button to turn off alarm and press again to reset. Check if the power failure lasted long enough to affect stored food temperatures.