Kenmore 4558 Use and Care Guide - Page 12

Setting

Get Kenmore 4558 - 30 in. Electric Drop-In Range PDF manuals and user guides View all Kenmore 4558 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Setting Oven Controls Note: The time of day must first be set in order to operate the oven. To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00". 1. Press _) pad once (do not hold pad down). 2. Within 5 seconds, press and hold the A orV pad until the correct time of day appears in the display. Note: The clock cannot be changed during any timed bake or Self-Clean cycle. To Set the Timer: 1. Press pad. 2. Press the ,j_ pad to increase the time in one minute increments. Press and hold the _ pad to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes. Note: If the V pad is pressed first, the timer will advance to 11 hours and 59 minutes. 3. The display shows the timer countdown in minutes until 1 minute remains. Then the display will count down in seconds. 4. When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until _/_{ pad is pressed. Note: The indicator light located above the pad will glow while the minute timer is active. Note: The timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The timer can be used alone or during any of the other oven functions. When the timer is in use with any other function, the timer will be shown in the display. To view other functions, press the pad for that function. To Change the Timer while it is in use: While the timer is active and shows in the display, press and hold the ,j_ or V pad to increase or decrease the time. To Cancel theTimer before the set time has run out: Press pad. Note: To turn the time of day display OFF or ON in the display press (_ pad and hold for 7 seconds (the control will beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the display is turned OFF the time of day will reappear for a few seconds any time the (_ pad is touched. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Setting
Oven
Controls
Note: The time of day must
first be set in order to operate the oven.
To Set the Clock
When the range
is
first plugged
in,
or when the power supply to the range has been
interrupted,
the display will flash
"12:00".
1.
Press _)
pad once (do not hold pad down).
2.
Within 5 seconds,
press and hold the A
orV
pad until the correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake or Self-Clean
cycle.
To Set the
Timer:
1. Press
pad.
2.
Press the
,j_
pad to
increase
the time
in
one minute
increments.
Press and hold the _
pad to
increase
the time
in
10 minute
increments.
The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note:
If the V
pad
is
pressed first, the timer will advance to 11 hours and 59 minutes.
3.
The display shows the timer countdown
in
minutes until 1 minute remains. Then the display will count down
in
seconds.
4.
When the set time has run out, the timer will beep 3 times. It will then continue
to beep 3 times
every
60 seconds
until _/_{
pad
is
pressed.
Note: The indicator
light located above the
pad will glow while the minute timer is active.
Note: The timer does not start or stop cooking. It serves as an
extra
timer in the kitchen that will beep when the set time
has run out. The timer can be used alone or during any of the other oven functions. When the timer is in use with any
other function,
the timer will be shown in the display. To view other functions,
press the pad for that function.
To Change
the Timer
while
it is in
use:
While the timer is
active
and shows in the display, press and hold the
,j_
or V
pad to increase or decrease
the time.
To
Cancel
theTimer
before
the set time
has
run out:
Press
pad.
Note: To turn the time of day display OFF or ON in the display press (_
pad and hold for 7 seconds (the control will
beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the
display is turned OFF the time of day will reappear for a few seconds any time the (_
pad is touched.
12