Kenmore 4558 Use and Care Guide - Page 23

& Cleaning, cont'd

Page 23 highlights

General Care & Cleaning (cont'd) Models with Ceramic Glass Cooktop (cont'd) Do not use the following on the ceramic glass cooktop: • Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean. • Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop. • Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn and cause discoloration. Special Caution for Aluminum Foil and Aluminum Cooking Utensils • Aluminum foil Use of aluminum foil will damage the cooktop. Do not use under any circumstances. • Aluminum utensils Since the melting point of aluminum is much lower than that of other metals, care must be taken when aluminum pots or pans are used. Pans that boil dry may permanently damage cooktop by breaking, fusing to, or marking it. Care and Cleaning of Stainless Steel (StainlessSteel models only) Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Please refer to the table provided at the beginning of the General Care & Cleaning section in this Use & Care Guide. iii!"!il"_iiii iiiiiii_il;:;!ii! Changing Oven Light ...ii.i...... Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb. Do not turn the oven light on during a self-cleaning cycle. High temperature will reduce lamp life. On some models an interior oven light will turn on automatically when the oven is opened. The oven light may be turned on when the door is closed by using the oven light switch located on the Electronic Oven control. The oven light bulb is covered with a glass shield held in place by a wire holder. THIS GLASS SHIELD MUST ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE. e Light Bulb: BE SURE OVEN IS COOL 1. Turn the power off at the main source. 2. Wear a leather-faced glove for protection against possible broken glass. 3. Replace bulb with a 40 Watt appliance bulb only. 4. Press wire holder to one side to release glass shield, change bulb and be sure to replace glass shield. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

General
Care
& Cleaning
(cont'd)
Models
with
Ceramic
Glass
Cooktop
(cont'd)
Do not use the following
on the
ceramic
glass
cooktop:
Do not
use
abrasive
cleaners
and
scouring
pads, such
as
metal
and
some
nylon
pads. They
may
scratch
the
cooktop,
making it
more
difficult
to
clean.
Do
not use
harsh
cleaners,
such
as chlorine
bleach,
ammonia
or oven
cleaners,
as they
may
etch
or discolor
the cooktop.
Do not
use
dirty
sponges,
cloths
or paper
towels,
as they
can leave soil
or
lint on the cooktop
which
can burn
and cause
discoloration.
Special
Caution
for
Aluminum
Foil
and
Aluminum
Cooking
Utensils
Aluminum
foil
Use of aluminum
foil will damage the cooktop. Do not use under any circumstances.
Aluminum
utensils
Since the melting point of aluminum
is much lower than that of other metals, care must be taken when aluminum
pots or pans are used. Pans that boil dry may permanently
damage cooktop by breaking,
fusing to, or marking
it.
Care
and
Cleaning
of Stainless
Steel (Stainless
Steel models
only)
Some models are equipped
with stainless steel exterior parts. Special care and cleaning are required
for maintaining
the appearance
of stainless
parts. Please refer to the table provided at the beginning
of the General
Care & Cleaning
section in this Use & Care Guide.
Changing
Oven
Light
Be sure the oven is unplugged
and all parts are COOL before replacing the oven light bulb. Do not turn the
oven light on during a self-cleaning
cycle. High temperature
will reduce lamp life.
On some models an interior
oven light will turn on automatically
when the oven is opened.
The oven light may be turned on when the door is closed by using the oven light switch located on the Electronic Oven
control.
iii!"!il"_iiii
iiiiiii_il;:;!ii!
........
iii
.......
The oven light bulb is covered with a glass shield held in place by a wire holder. THIS GLASS
SHIELD
MUST ALWAYS
BE IN PLACE WHEN THE OVEN IS IN USE.
e
Light
Bulb:
BE SURE OVEN IS COOL
1. Turn the power off at the main source.
2. Wear a leather-faced
glove for protection against possible broken glass.
3.
Replace bulb with a 40 Watt appliance
bulb only.
4.
Press wire holder to one side to release glass shield, change bulb and
be sure to replace glass shield.
23