Kenmore 4803 Installation Instructions - Page 2

Do not remove spacers (if equipped) on the side walls and/or on the back of the built-in oven, These spacers center the oven in the space provided. The oven must be centered to prevent excess heat buildup that may result in heat damage or fire. 1" (2,5cm) Min, i]/i@iiii " B %. Door Operi (seenote 2) ! _--Spacer 3" (7.6 cm) Max. 2"(5 cm) WideWoodSpacerif Needed Junction Box NOTES: 1. Base must be capable of supporting 300 pounds 4. For a cutout height greater than 491A'' (125.1 cm) (136 kg) for 27" models and 375 pounds (170 kg) for 30" models. add a 2" (5 cm) wide wood shim of appropriate height to each side of the opening under the 2. Allow at least 21 " (53.3 cm) clearance in front of appliance side rails. oven for door depth when it is open. 3. Dimension G (cutout depth) is critical to the proper installation of the built-in oven. If the oven * For Cutout height between 5113/16"(131.6 cm) and 51W16" (131.9 cm) use the larger inferior trim decorative trim does not butt against the cabinet, or supplied with the wall oven. if noise is heard on convection models, verify dimension G to assure it is according to the required dimension. Figure 2 27" AND 30" DOUBLE OVENS (Single Ovens see Figure 1) 27" (68.6 cm) Wall Oven 30" (76.2 cm) Wall Oven 27 (68.6) 30 (76.2) 501/2(128.3) 501/2(128.3) 248/s (62.5) 281/4(71.8) 241/2(62.2) 241/2(62.2) 27" (68.6 cm) Wall Oven 247/s(63.2) 30" (76.2 cm) Wall Oven 281/2 (72.4) 251/4(64.1) 29 (73.7) All dimensions are in inches (cm). 231/2(59.7) 231/2(59.7) 48%(124.1) 497/s(126.7) 487/s (124.1 ) 497/s (126.7)* 27%(68.9) Min 30% (76.5) Min 2