Kenmore 4803 Installation Instructions - Page 7

6. For typical under counter installation of an electric built-in oven see Figure below. Only certain cooktop models may be installed over certain built-in electric oven models. Approved cooktops and built-in ovens are listed by the MFG ID number and product code (see the insert sheet included in the literature package and cooktop installation instructions for the dimensions). To reduce the risk of personal injury and tipping of the wall oven, the wall oven must be secured to the cabinet (s) by mounting brackets, Approx. 3" (7.5 cm) Cabinet side filler panels are necessary to isolate the unit from adjoining cabinets. Cabinet side filler height should allow for installation of approved cooktop models 36" Min. (91.4 cm) Min. I I 208/240 Volt junction I for built-in oven. Use 3/4" (1.9 cm) plywood, installed on two runners, flush with toe plate. Basemust be capable of supporting 150 pounds (68 kg) for 27" models and 200 pounds (90 kg) for 30" models. Cut an opening in wood base minimum 9" x 9" (23 X 23 cm), 2" (5 cm) from left side filler panel, to route armoured cable to junction box. 4 1/2" (11.5 cm) Max.* * If no cooktop is installed directly over the oven unit, 5" (12.7 cm) maximum is allowed above the floor. 27" (68.6 cm) 247/8" (63.2 cm) Min. Wall Oven 25¼" (64.1 cm) Max. 30" (76.2 cm) 281/2" (72.4 cm) Min. Wall Oven 29" (73.7 cm) Max. 23Y2" (59.7 cm) Min. 23Y2" (59.7 cm) Min. 27¼" (69.2 cm) Min. 281/2'' (72.4 cm) Max. 27¼" (69.2 cm) Min. 281/2'' (72.4 cm) Max. Figure 9 - TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRICBUILT-IN OVEN WITH AN ELECTRICCOOKTOP MOUNTED ABOVE 7