Kenmore 4885 Use and Care Guide - Page 18

TIME AND STATUS DISPLAY The time and status display shows the estimated time remaining, cycle progress, and door lock status. O ESTIMATED TIME REMAINING When the cycle selector knob is pressed, the washer automatically detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle. NOTES: • The time shown is estimated. For example, the time displayed may pause for a period of time while the machine is heating the water or balancing the load. Under certain conditions, the machine can pause for extended periods of time. • Estimated time is based on normal operating conditions. Several external factors (load size, room temperature, incoming water temperature, etc.) also affect the length of estimated time vs. actual time. _) LOAD-SENSING INDICATOR These lights will illuminiate briefly at the beginning of the cycle after the control has measured the load size. From one to four lights will be lit depending on the size of the load. Once the load size has been measured, the amount of detergent can then be adjusted for maximum performance. G CYCLE STATUS INDICATOR These status LEDs illuminate to indicate which portion of the cycle is currently running. A blinking light indicates the active portion of the cycle. When that portion is complete, the light will remain steady. O DOOR LOCK INDICATOR Indicates that the door is locked. The washer door will lock while the washer is operating. The door can be unlocked by pressing the cycle selector knob to pause the washer. NOTES: • If the temperature in the washer is too high, the door cannot be unlocked until the washer has cooled. • If the water level is too high, select the DRAIN & SPIN cycle to drain excess water. Do not try to force the door open. 18