Kenmore 7531 Use and Care Guide - Page 15

• Loosenthe2 screwsandremovethedoor Closer/Stop. Fig.41 _ Door Closer/Stop , With a flat-head screwdriver, carefully pry off and remove the cover over the screw holes on the left side of refrigerator housing. Fig. 45 Take Door Closer/Stop and flip it over. Line up screw holes and screw it into left side of door bottom. Turn door upright. It is now ready for re-attaching. Fig. 42 • Remove the outer screw from cabinet at area between freezer and refrigerator doors. (You will need this hole for the Middle Hinge Bracket.) Fig. 46 0 - Place screw into outer hole on right side of cabinet. Attach cover on the right side. Cover is force-tilted. , Insert the water dispenser tube into the left channel at the base of the dispenser cavity until it comes out of the bottom left corner of door. ° Insert and reattach tube guide. S._ew Fig. 43 seudcerew• Flip the middle hinge bracket (flange now will be on top) and position on left side of refrigerator and re-attach with two bolts and a phillips screw. Fig. 48 left channel right channel "_ _J o Reconnect the wire connector to the back of the dispenser cover, then insert the dispenser cover top clips into the slots in the top of the dispenser cavity. Make sure that the dispenser tube is lined up with the hole in the dispenser cover. Press against cover firmly to reattach. Middle ge Bracket Pull the wire harness out from the base as shown below. Fig. 44 Fig. 49 15