Kenmore 7755 Use and Care Guide - Page 28

Setting Oven Controls • Setting Convection Convert Feature • Setting Add 1 Minute Feature To set the Convection Convert feature The _ CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When set properly, this feature is designed to display the oven set converted (reduced) temperature in the display. Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added. INSTRUCTIONS Using Convection Convert feature to adjust oven temperature from a Bake recipe (example below when setting oven for 350°F): 1. Arrange interioroven racks and place food in oven. 2. Press _"), (See Fig. 1). If a Cook Time or a Delay Start is desired, enter the times now. 3. Press C_oC_r.t"CONV BAKE" and the oven set temperature adjustment will appear in the display (for this example it is 325°F). A beep will sound once the adjusted oven set temperature is reached. (See Fig. 2). Notes: When used with a Cook Time or a Delay Start setting, the Convection Convert feature will display a "CF" for check food when the bake time is 75% complete (See Fig. 3). At this time the oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and will sound 3 long beeps every 30 seconds until the (_ pad is pressed (See Fig. 4). PRESS ® DISPLAY Fig. 1 Fig. 2 Fig. 3 Fig. 4 The oven icon will show a rotating fan within the square. This rotating fan icon indicates when the Convection Fan is operating (See Figs 2 or 3) Press (_ to cancel Convection feature at any time, ® Note: The minimum amount of cook time using the Convection Convert feature with a Cook Time or a Delay Start function is 20 minutes. To Set Add 1 Minute Feature The @ keypad is used to set additional minutes to the Timer. Each time the @ pad is pressed, another minute is added. If the Timer is not active and the @ key pad is pressed, the Timer feature will become active and will begin counting down from I minute. When the Timer reaches the end of the set time, "End" will display and signal 3 long beeps at regular intervals until _ej_r is pressed again. 28