Kenmore SI3209ZA Use and Care Guide - Page 17

Do not store

Get Kenmore SI3209ZA - Elite Island Base Unit Grill PDF manuals and user guides View all Kenmore SI3209ZA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

LP Gas Model only: Connect Regulator with Hose to your LPG Tank [] Turn all Burner Valves to the OFF position. [] Inspect the valve connection port and regulator as- sembly for damage or debris. Remove any debris. Never use damaged or plugged equipment. [] Connect the regulator assembly to the tank valve and HAND TIGHTEN nut clockwise to a full stop. DO NOT use a wrench to tighten because it could damage the Quick Coupling Nut and result in a hazardous condition. [] Open the tank valve 1/4 to 1/2 (counterclockwise) and use a soapy water solution to check all connections for leaks before attempting to light your grill. See "Checking for LP Gas Leaks". If a leak is found, turn the tank valve off and do not use your grill until the leak is repaired. // -... Type 1 connection per _ANSI Z21.58b-2007/CSA 1.6A-2007 Quick C...o..upling Nut Grill Gas Valve/Manifold /Assembly / Regulator with Hose (LPG) / LP Gas Tank / CAUTION: When the appliance is not in use the gas must be turned off at the tank. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane. Check all connections for LP Gas Leaks Never test for leaks with a flame. Prior to first use, at the beginning of each season, or every time your LP Gas tank is changed, you must check for gas leaks. Follow these three steps: [] Make a soap solution by mixing one part liquid detergent and one part water. [] Turn the grill Control Knobs to the full OFF position, then turn the gas ON at source. [] Apply the soap solution to all gas connections indicated by the arrows. See diagram. If bubbles appear in the soap solution the connections are not properly sealed. Check each fitting and tighten or repair as necessary. Disconnecting A Liquid Propane Gas (LPG) Tank From Your Grill [] Make sure the Burner Valves and LP Gas tank valve are off. (Turn clockwise to close.) [] Detach the hose and regulator assembly from the LP Gas tank valve by turning the Quick Coupling Nut counterclockwise. 1. Do not store spare LP cylinder within 10 feet (3m) of this appliance. 2. Do not store or use gasoline or other flammable liquids and vapors within 25 feet (8m) of this appliance. 3. When cooking with oil/grease, do not allow the oil/grease to get hotter 350°F (177°C) 4. Do not leave oil/grease unattended. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
LP
Gas
Model
only:
Connect
Regulator
with
Hose
to
your
LPG
Tank
[]
Turn
all
Burner
Valves
to
the
OFF
position.
[]
Inspect
the
valve
connection
port
and
regulator
as-
sembly
for
damage
or
debris.
Remove
any
debris.
Never
use
damaged
or
plugged
equipment.
[]
Connect
the regulator
assembly
to the tank
valve and
HAND TIGHTEN
nut clockwise
to a full stop. DO NOT
use
a
wrench
to
tighten
because
it could
damage
the
Quick
Coupling
Nut
and
result
in
a
hazardous
condition.
[]
Open the tank valve 1/4 to 1/2 (counterclockwise)
and
use a soapy water
solution
to check
all connections
for
leaks
before
attempting
to
light
your
grill.
See
"Checking
for
LP
Gas
Leaks".
If a leak
is found,
turn the
tank
valve off and do
not use
your grill until
the
leak
is
repaired.
//
-...
Type
1 connection
per
_ANSI
Z21.58b-2007/CSA
1.6A-2007
Quick
......................................
Coupling Nut
Grill
Gas
Valve/Manifold
/Assembly
/
Regulator
with
Hose
(LPG)
/
LP Gas Tank
/
CAUTION:
When
the
appliance
is not
in
use
the
gas
must
be
turned
off
at the
tank.
Place
dust
cap
on
cylinder
valve
outlet
whenever
the
cylinder
is
not
in
use.
Only
install
the
type
of
dust
cap
on
the
cylinder
valve
outlet
that
is
provided
with
the
cylinder
valve.
Other
types
of
caps
or
plugs
may
result
in
leakage
of
propane.
Check
all connections
for
LP Gas
Leaks
Never
test
for
leaks
with
a flame.
Prior
to
first
use,
at the
beginning
of
each
season,
or
every
time
your
LP
Gas tank
is changed,
you
must
check
for
gas
leaks.
Follow
these
three
steps:
[]
Make
a
soap
solution
by
mixing
one
part
liquid
detergent
and
one
part
water.
[]
Turn
the
grill
Control
Knobs
to
the
full
OFF
position,
then
turn
the
gas
ON
at source.
[]
Apply
the
soap
solution
to
all
gas
connections
indicated
by
the
arrows.
See
diagram.
If
bubbles
appear
in
the
soap
solution
the
connections
are
not
properly
sealed.
Check
each
fitting
and
tighten
or
repair
as
necessary.
Disconnecting
A Liquid
Propane
Gas (LPG)
Tank
From
Your
Grill
[]
Make
sure
the
Burner
Valves
and
LP
Gas
tank
valve
are
off.
(Turn
clockwise
to
close.)
[]
Detach
the
hose
and
regulator
assembly
from
the
LP
Gas
tank
valve by
turning
the
Quick
Coupling
Nut
counterclockwise.
1. Do
not
store
spare
LP
cylinder
within 10
feet
(3m) of this appliance.
2. Do not store
or use gasoline
or
other
flammable
liquids
and
vapors
within
25 feet
(8m) of this
appliance.
3. When
cooking
with
oil/grease,
do
not
allow
the
oil/grease
to
get
hotter
350°F
(177°C)
4. Do
not
leave
oil/grease
unattended.
17