Kenwood 6020 Instruction Manual - Page 7
Attenuator, Volume, Adjusting Clock, Audio Control Setting, Turning Attenuator On/Off
View all Kenwood 6020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Volume Increasing Volume: Press the 5 button to turn up the volume. Decreasing Volume: Press the ∞ button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume all the way down deactivates the attenuator function. Audio Control Setting Adjust various sound levels. 1 Press the AUD button twice to enter the control mode. 2 Press either the 4 or ¢ button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the ¢ button advances the display, and pressing the 4 button reverses it. "Balance" "Fader" "N-F" (only when being switched) 3 Press the FM/AM button. Look at the table to adjust the mode being displayed. Adjustment mode (Display) Operation of Audio control button AM button FM button Balance ("Balance") Left channel emphasized. Right channel emphasized. Adjusting Clock Adjust the clock. 1 When the clock is not displayed, first press the DISP button to display "Clock". 2 Press the DISP button for at least two seconds to enter the clock adjustment mode. 3 • Adjusting the hours Press the FM button to advance the hours, or press the AM button to make the hours go back. • Adjusting the minutes Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back. 4 Press the DISP button to end the clock adjustment mode. Fader ("Fader") Non-Fading Preout Level ("N-F") Rear channel emphasized. Front channel emphasized. Non-fading sound reduced. Non-fading sound emphasized. 4 Press the AUD button to end the control mode. -7-