Kenwood 702IR Instruction Manual - Page 6
Setup Menu, Operations
UPC - 019048167002
View all Kenwood 702IR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Operations Setup Menu Setting the AV Output Selects an AV source to be output at the "AV OUTPUT" terminals. Press the [MENU] button for at least 1 second. Each time the button is pressed for at least 1 second, the AV output switches as follows: Display "AV-IN1" "AV-IN2" "Off" Setting Select the AV1 INPUT source. Select the AV2 INPUT source. No output to the AV OUTPUT terminals. Menu System The Menu system operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button. Menu screen is displayed, and the monitor enters to Menu mode. Current menu item AV-OUT IR HEADPHONE Surround Frequency AV-IN1 Normal On 2MHz Display information When you press the [V.SEL] button, the status of the monitor is displayed. 3 AV-IN2 1 Mode Full 2 I R Off 4 A V AV-IN1 1 Screen mode Display 2 IR Headphones audio setting Display 3 Video source Display 4 AV output Display • The information display is cleared automatically after approximately 5 seconds. 2 Select the menu item Press the [MENU] button. Each time the button is pressed, the menu item switches. 3 Set the menu item Press the [2] or [3] button. You can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MODE] button. • You can select "Surround" and "Frequency" when is not set to "Off". • If you make no operation for 15 seconds, this mode is automatically canceled. 6 | English