Kenwood DDX1035 Operation Manual - Page 32

Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). General TUNER If there seems to be a problem Symptom No sound comes out of the speakers. The unit does not work at all. The remote controller does not work. AME automatic presetting does not work. Static noise while listening to the radio. • Recordable/Rewritable discs cannot be played back. • Tracks on the Recordable/ Rewritable discs cannot be skipped. Playback does not start. No picture appears on the external monitor. Disc cannot be played back. Remedy/Cause • Adjust the volume to the optimum level. • Check the cords and connections. Reset the unit. (+ page 3) Replace the battery. Store stations manually. (+ page 22) Connect the antenna firmly. • Insert a finalized disc. • Finalize the discs with the component which you used for recording. The format of files is not supported by the unit. • Connect the video cord correctly. • Select the correct input on the external monitor. • Record the tracks using a compliant application on the appropriate discs. (+ page 11) • Add appropriate extension codes to the file names. Disc in general Tracks are not played back as Playback order may differ from the one played back you have intended them to play. using other players. MPEG1/MPEG2/MPEG4/ JPEG/MP3/WMA AV IN1/ AV IN2 No picture appears on the screen. • Turn on the video component if it is not on. • Connect the video component correctly. • When "AV IN2" is selected as the source, set to [AV IN2]. 32 English