Kenwood DDX7025BT Operation Manual - Page 46
Displaying the <Setup> menu screen, <Audio> setting screen
View all Kenwood DDX7025BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SETTINGS Setting menu items ❏ Displaying the menu screen Balance: Adjust the left and right speaker output balance. • L6 to R6 (Initial: 0) Press [J]/[K]/[H]/[I] or drag [ ] to adjust. - To clear the adjustment, press [Center]. Change the sound mode or adjust and store the • You can change the page to display more items by pressing [J]/[K]. • You cannot change the settings screen when [STANDBY] is selected on the . ❏ setting screen Fader: Adjust the front and rear speaker output balance. • F6 to R6 (Initial: 0) - When using a two-speaker system, set the fader to the center (0). • Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/ iPod*1/Powerful/User You can activate/deactivate loudness. • ON (Initial): Boost low and high frequencies to produce a well-balanced sound at a low volume level. • OFF: Cancels. Adjust and store the auto-adjustment volume level for each source. (For discs, the adjustment is stored for each of the following categories: DVD/DVD-VR/ VCD, CD, and DivX/MPEG1/MPEG2/H.264/WMV/ MP3/WMA/WAV/AAC/FLAC.) The volume level will automatically increase or decrease when you change the source. • -15 to +6 (Initial: 0) Adjust the subwoofer level. • -50 to +10 (Initial: 0) • Car type: O (initial)/Compact/Sedan/ Wagon/Minivan/SUV/Passenger Van • Speaker Location: Select the location of the speaker on your car. - Front Speaker: Door (initial)/On Dash/Under Dash - Rear Speaker*2: Door/ Rear Deck/2nd Row/ 3rd Row Select the speaker size and adjust the crossover Adjust the sound e ects according to your listening Select whether to use the Digital Signal Processor (DSP) system. • Bypass: Invalidates all the settings for the DSP. • Through (Initial): Uses the DSP. You can reduce the driving noise by raising the bandwidth. • ON: Activates the Drive EQ. • OFF (Initial): Cancels. *1 Appears only when iPod is selected as the source. *2 The initial setting varies depending on the car type setting. 46