Kenwood DDX7025BT Operation Manual - Page 63

REFERENCES Error message list If an error occurs while using the unit, a message appears. Take appropriate action according to the following message/remedy/cause list. "No Signal"/"No Video Signal": • Start playback on the external component connected to the AV-IN1 or iPod/AV-IN2 input terminal. • Start playback on the smartphone connected to HDMI/MHL input terminal. • Check the cords and connections. • Signal input is too weak. "Miswiring DC Offset Error"/"Warning DC Offset Error": • A speaker cord has shorted or it has come into contact with the car chassis. Wire or insulate the speaker cord as appropriate, then reset the unit. (Pages 3 and 55) "Parking off": • No playback picture is shown when the parking brake is not engaged. "Authorization Error": • Check whether the connected iPod/iPhone is compatible with this unit. (Page 62) "USB Device Error": • The USB power voltage is abnormal. • Turn off and turn on the unit. • Connect another USB device. "Panel Mecha Error": • The panel does not work properly. Reset the unit. "No Navigation": • No navigation unit is connected. "ConnectionEr ror": • The device is registered but the connection has failed. Connect the registered device. (Page 32) "Please Wait...": • The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). "No Voice Device": • The connected mobile phone does not have a voice recognition system. "No Data": • No phone book data is contained in the connected Bluetooth phone. "Initialize Error": • The unit has failed to initialize the Bluetooth module. Try the operation again. "Dial Error": • Dialing has failed. Try the operation again. "Hung Up Error": • The call has not ended yet. Park your car, and use the connected mobile phone to end the call. "Pick Up Error": • The unit has failed to receive a call. ENGLISH 63