Kenwood DDX7025BT Operation Manual - Page 55

CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals Page 57 USB terminal: Pages 56 - 57 Pages 56 - 57 Page 58 Connect the aerial cord to the aerial terminal. REVERSE Purple with white stripe Connect to the vehicle's reverse lamp harness when using the optional rear view camera. (Reverse sensor wire) PRK SW Light green (Parking sensor wire) 3 10 A fuse Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. * If no connections are made, do not let the cable come out from the tab. 1 Blue with white stripe (Power control/aerial control wire) Brown (Mute control wire) Light blue with yellow stripe (Steering remote control wire) Orange with white stripe (Dimmer control wire) * To the power control terminal when using the optional power amplifier or to the aerial control terminal in the vehicle. To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matching your car is required. To car light control switch Yellow (Battery wire) Red (Ignition wire) Red (A7) Yellow (A4) Connector A Connector B Connecting the ISO connectors on some VW/ Audi or Opel (Vauxhall) automobiles You may need to modify the wiring of the supplied wiring harness as illustrated below. Red (Ignition wire) Red (A7) Unit Yellow (Battery wire) Vehicle Yellow (A4) Default wiring Pin Color and functions of Connector A and B A4 Yellow Battery A5 Blue/White Power control A6 Orange/White Dimmer A7 Red Ignition (ACC) A8 Black Ground connection B1/B2 Purple ª / Purple/Black · Right speaker (rear) B3/B4 Gray ª / Gray/Black · Right speaker (front) B5/B6 White ª / White/Black · Left speaker (front) B7/B8 Green ª / Green/Black · Left speaker (rear) ENGLISH 55