Kenwood DDX7025BT Operation Manual - Page 67
MHL interface Bluetooths ection, DSP FM tuner LW tuner MW tuner
![]() |
View all Kenwood DDX7025BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
REFERENCES ❏ MHL interface section Supported Version MHL 2 Maximum Power Supply Current DC 5 V 900 mA ❏ Bluetooths ection Technology Bluetooth 3.0 + EDR Frequency 2.402 GHz to 2.480 GHz Output Power +4 dBm (MAX), 0 dBm (AVE), Power Class 2 Maximum Communication Range Line of sight approx. 10 m Audio Codec SBC/AAC/MP3 Profile HFP (Hands Free Profile) PBAP (Phonebook Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) GAP (Generic Access Profile) SDP (Service Discovery Profile) SPP (Serial Port Profile) ❏ DSP section Graphics equalizer BAND 7 Band Frequency (Hz) (BAND1-7) 62.5/160/400/1k/2.5k/6.3k/16k Gain -9/-8/-7/-6/-5/-4/-3/-2/ -1/0/1/2/3/4/5/6/7/8/9 dB 2 Way X'Over HIGH PASS FILTER frequency Through/50/60/80/100/120/150/ 180/220 SLOPE -6/-12/-18/-24 dB/Oct. LOW PASS FILTER frequency 50/60/80/100/120/Through SLOPE -6/-12/-18/-24 dB/Oct. Position Front/Rear/Subwoofer Delay 0 cm to 610 cm (2.0 cm Step) Gain -8 dB to 0 dB Subwoofer Level -50 dB to +10 dB ❏ FM tuner section Frequency Range (50 kHz) 87.5 MHz to 108.0 MHz Usable Sensitivity (S/N: 26 dB Dev 22.5 kHz) 9.3 dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N: 46 dB Dev 22.5 kHz) 15.2 dBf (1.6 μV/75 Ω) Frequency Response (± 3.0 dB) 30 Hz to 15 kHz Signal to Noise Ratio 75 dB (MONO) Selectivity (± 400 kHz) ≥ 80 dB Stereo Separation 45 dB (1 kHz) ❏ LW tuner section Frequency Range (9 kHz) 153 kHz to 279 kHz Usable Sensitivity 45 μV ❏ MW tuner section Frequency Range (9 kHz) 531 kHz to 1 611 kHz Usable Sensitivity 25 μV ENGLISH 67
![](/manual_guide/products/kenwood-ddx5025bt-operation-manual-ebe1d27/67.png)