Kenwood DDX714 Owner's Manual (pdf) - Page 50

Hands Free Unit Control Various functions can be used in the Hands Free control mode. Before Use • You need to register your cell-phone before using it with this unit. For more details, see (page 71). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 73). • To use the Phone Book, it must be downloaded to this unit in advance. For details, see (page 50). • To cancel downloading of the phonebook data, operate the cell-phone. Receiving a Call Downloading the Phonebook Downloads the phonebook data from the cell-phone to this unit so that you can use the Phonebook of this unit. 1 By operating the cell-phone, send the phonebook data to this unit 2 By operating the cell-phone, start the hands-free connection ⁄ • For the cell-phones which support auto-download of phonebook: If the phonebook is not downloaded automatically for some reasons, follow the procedure above to download manually. • For how to operate the cell-phone, refer to the Instruction Manual that comes with your cell-phone. • Up to 1000 phone numbers can be registered for each registered cell-phone. • Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name. (* 50: Number of alphabetical characters. Fewer characters can be input depending on the type of characters.) • Depending on the type of your cell-phone, the following restrictions are placed: - The phonebook data cannot be downloaded normally. - Characters in the Phonebook are garbled. - The phonebook data cannot be downloaded normally if it contains images. It may take several hours to a full day to download the phone book depending on the total image size. [ ] Answering a Phone Call [ ] Rejecting an Incoming Call During a Call [ ] Switches the voice output between phone and speaker. [DTMF] Outputs dial tone. See (page 54). [ ] Disconnecting a call Adjusting the Voice Volume during a Call 50 DNX7140/DNX7000EX/DDX714/DDX7034BT