Kenwood DDX714 Owner's Manual (pdf) - Page 66
Security Setup - security code
UPC - 019048182548
View all Kenwood DDX714 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Setup Menu Security Setup You can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security screen Touch [ ] > [ (page 63) ] > [System] > [Security]. 2 Setup the SI (Security Indicator) 6 Reenter the security code Reenter the same security code as that you have entered in Step 4 for confirmation. ⁄ • If you enter a different security code, the screen returns to Step 4 (for the first code entry). 7 Register the security code again Now, your security code is registered. If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code [Security Code Set] Displays the Security code input screen. [SI] Turns the SI function on or off. If turned "ON", the SI indicator on the front panel flashes when the vehicle ignition is off. ( "ON") 3 Start Security Code setup You must enter the same security code as that you have entered in Step 4. 2 Register your security code Now, you can use your Receiver. ⁄ • If you have already completed the code registration, [CLR] is displayed. 4 Enter a security Code Input four-digit number. 5 Register your security code 66 DNX7140/DNX7000EX/DDX714/DDX7034BT