Kenwood DDX8036BT User Manual 1 - Page 83

Speaker Setup You can select a speaker type and its size to get the best sound effects. 1 Display the Speaker Select screen Touch [ ] > [ ] > [Audio SETUP] > [Speaker Select]. (page 67) 2 Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. 1 2 3 4 1 Center speaker (DDX8 series) 2 Front speaker 3 Rear speaker 4 Subwoofer [Tweeter] You can set the tweeter when you are selecting front speakers. If you are using a tweeter together with the front speakers, set the tweeter to "ON". In the "ON" position, the Equalizer is adjusted to its best position. [X'over] Displays the Speaker Crossover Setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. 3 Select a speaker type "Center" None, 40x70 mm, 5 cm, 10 cm, 13 cm, 16 cm over "Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10 "Rear" None, OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10 "Subwoofer" None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over ⁄ • Select "None" if you have no speakers. • If you set the center speaker to "None" even in a short time when you are setting the Surround Control to "Bypass+Center", the Surround Control is set to "Bypass" automatically. See (page 66). • If you set the center and rear speakers to "None" when you are setting the Surround Control to "Dolby PL II", the Surround Control is set to "Bypass" automatically. See (page 66). Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 2 3 4 1 Sets the High Pass Filter of the center speaker. (DDX8 series) 2 Sets the High Pass Filter of the front speaker. 3 Sets the High Pass Filter of the rear speaker. 4 Sets the Low Pass Filter of the subwoofer. You can select any of the following speaker types. DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM Next page 3 English 83