Kenwood DDX8036BT User Manual 1 - Page 84
Car Type DTA Setup
View all Kenwood DDX8036BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Setup Menu 2 Display the Crossover setup screen 3 Set the crossover [Phase] Sets the phase of subwoofer output. The phase is reversed 180 degrees when set to "Reverse". (Only when "Subwoofer" is set to any item other than "None" in Speaker Setup) [HPF FREQ] High Pass Filter adjustment. (When front, center or rear speaker is selected on Speaker Select screen) [LPF FREQ] Low Pass Filter adjustment. (When Subwoofer is selected on Speaker Select screen) [Slope] Sets a crossover slope. Car Type (DTA) Setup You can setup the car type and speaker network, etc. 1 Display the Car Type Setup screen Touch [ ] > [ ] > [Audio SETUP] > [Car Type]. (page 67) 2 Setup the Car Type If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. 1 1 Sets up the car type you use together with this unit. You can choose according to type of your car. "OFF", "Compact", "Full Size Car", "Wagon", "Minivan", "SUV", "Minivan (Long)" [Location] Sets the locations of the speakers. [Adjust] Displays the Car Type Adjust screen. You can adjust the digital time alignment that was set automatically when you selected the car type. Speaker Location setup 1 Display the Speaker Location Setup screen 84 DNX series DNX7360BT/ DNX7360BTM