Kenwood DDX919WS Instruction Manual - Page 60
Other External Components, View Camera
View all Kenwood DDX919WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Other External Components Other External Components View Camera NOTE • To connect a camera, see P.96. • To use a rear view camera, a REVERSE lead connection is required. (P.91) • If [Rear Camera Interruption] is active the camera screen is displayed when you shift the gear to the reverse (R) position. ÑÑDisplay the camera screen 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Camera]. 4 Switching the Angle *2 Touching each time changes camera angles. *1 When two or more cameras of rear, front, left, and right are connected with this unit. *2 When CMOS-3xx series is connected with this unit. To switch the view camera 1 Touch [ 1 ]. hhCamera switching keys appear left/right side. 2 Select a view camera you want to switch. hhView camera screen appears. 3 Adjust each item as follows. To erase the caution message, touch the screen. 1 3 4 2 1 Switching the View Camera *1 Touch to display the camera switching keys. It is necessary to set "Camera Assignment Settings" beforehand. See To switch the view camera (P.60). 2 Camera off Touch to exit the camera screen. 3 Switching the Guideline *2 Touching each time turns on or off the guideline. NOTE • To switch to the picture other than selectable view camera from the camera switching keys, change the key function of except "Rear" in [Camera Assignment Settings]. (P.61) ÑÑCamera Setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Camera]. hhCamera screen appears. 60