Kenwood DDX919WS Instruction Manual - Page 90
Antenna Power, interior parts do not obstruct the amplifier
View all Kenwood DDX919WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Connection/Installation 4) Rub the film antenna (accessory ~) gently in the direction of the arrow shown below to firmly stick it to the windscreen. When installing the antenna on the left side 5) Remove the second sheet (tag 2) on the film antenna (accessory ~) vertically. Earth sheet !~ 7) Remove the film covering the earth sheet and attach the earth sheet to the metal part of the vehicle. Provide sufficient space for the earth sheet so that it does not obstruct the interior parts (front pillar cover). Also take care that the interior parts do not obstruct the amplifier unit (accessory !). Front glass ! Front pillar Sheet (tag 2) 6) Match the protrusions of the amplifier unit (accessory !) with the T markings on the film antenna (accessory ~) and attach the amplifier. Do not touch the lead terminal or the adhesive side of the amplifier unit (-). When installing the antenna on the right side ~ ! Earth sheet Match the protrusion with the 5 mark Font pillar cover Earth sheet 8) Wire the antenna cables. Use cord clamper (accessory -) to secure the antenna cable to the pillar in several places. 9) Reattach the front pillar cover. 10) Be sure not to damage the earth sheet and amplifier unit (accessory !) when reattaching. 11) Connect the amplifier unit (accessory !) to the DAB input terminal on the rear of the unit. 12) Set [Antenna Power] to [ON]. (P.47) Lead terminal of the film antenna (~) Lead contact of the amplifier unit (metal part) 90