Kenwood DDX919WS Instruction Manual - Page 98
Apple CarPlay, Precautions on handling discs, Region Codes in the World P.101
View all Kenwood DDX919WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Troubleshooting Read Error The disc is quite dirty. Clean the disc. See Precautions on handling discs (P.4). Disc is upside down. Load the disc with the labeled side up. Region Code Error The disc you wanted to play has a region code that cannot be played with this unit. See Region Codes in the World (P.101) or try another disc. Error 07-67 The unit is not operating correctly due to some reason or other. Turn the power off and on again. If the "Error 07−67" message does not disappear, contact your nearest KENWOOD dealer. No Device (USB device) The USB device is selected as a source although no USB device is connected. Change the source to any source other than USB/ iPod. Connect a USB device, and change the source to USB again. Disconnected (iPod, Bluetooth audio player) The iPod/Bluetooth audio player is selected as a source although no iPod/Bluetooth audio player is connected. Change the source to any source other than iPod/ Bluetooth. Connect an iPod/Bluetooth audio player, and change the source to iPod/Bluetooth again. No Media file The connected USB device contains no playable audio file. Media was played that doesn't have data recorded that the unit can play. See Playable Media and Files (P.99) and try another USB device. USB device over current status detected. The connected USB device is rated a current capacity higher than the allowable limit. Check the USB device. Some trouble may have occurred to the connected USB device. Change the source to any source other than USB. Remove the USB device. ÑÑApple CarPlay The speed sensor must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The speed pulse is not detected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Apple CarPlay Device List]. Check the connection of the speed pulse or plug in over USB to use Apple CarPlay. The GPS antenna must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The GPS antenna is not connected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Apple CarPlay Device List]. Check the connection of the GPS antenna or plug in over USB to use Apple CarPlay. The speed sensor and the GPS antenna must be connected to use Apple CarPlay wirelessly. Please verify the proper connections or plug in by USB to use Apple CarPlay. The speed pulse is not detected and the GPS antenna is not connected when the Apple CarPlay is started by connecting wirelessly or when the iPhone compatible with wireless Apple CarPlay is registered in [Apple CarPlay Device List]. Check the connection of the speed pulse and the GPS antenna or plug in over USB to use Apple CarPlay. 98