Kenwood DNX4280BT User Manual - Page 70
Touch panel adjustment, Security setup, You can set up a security code to protect
View all Kenwood DNX4280BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Touch panel adjustment 1 Touch [Touch] in the System Menu screen. Touch Panel Adjustment screen appears. 2 Follow the instruction on the screen and touch the center of each . Return to the Top page Setting Up 2 Touch [ON] of [SI]. NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset to the initial status, touch [Reset]. Security setup operation You can set up a security code to protect your receiver system against theft. NOTE • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Touch [Security] in the System Menu screen. Security screen appears. NOTE • If "SI" is turned on, the SI indicator on the sub panel flashes when the vehicle ignition is off and the panel is detached. Default is "ON." 3 Touch [SET] of [Security Code Set]. NOTE • If you have already completed the code registration, [CLR] is displayed. 4 Enter a security code with four-digit number and touch [Enter]. 5 Enter the same code again and touch [Enter]. Security code is registered. NOTE • If you enter a different security code, the screen returns to step 4 (for the first code entry). • If you have pressed button or if you have disconnected the Receiver from battery, enter the correct security code as that you have entered in step 4 and touch [Enter]. You can use your Receiver. operation A red indicator will blink on the unit after the ACC is set to OFF, warning potential thieves. If turned to "ON" (default), the security indicator on the front panel flashes when the vehicle ignition is off. 1 Touch [Security] in the System Menu screen. Security screen appears. 2 Touch [ON] or [OFF] of [SI]. 69