Kenwood DNX4280BT User Manual - Page 86
Listening Position , Position DTA Control
View all Kenwood DNX4280BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Listening Position You can adjust the sound effects according to your listening position. 1 Touch [Position]. Return to the Top page Audio Setting Up Position DTA Control You can fine-adjust your listening position. 1 In Position screen, touch [DTA]. 2 Select the speaker you wish to adjust by touching speaker icon. Position screen appears. 2 Select listening position from [Front R] (Right front), [Front L] (Left front), [Front All] (All front), [All], and [User] using [2] and [3]. 3 Set DTA as follows. NOTE • You can store present setting in memory by touching [P1], [P2], or [P3] for 2 seconds. You can also recall the setting by touching corresponding number. • The final distance is adjusted to the total of car type set up value (P.79) and position setup (both position and position DTA) value. • If you change the car type set up value (P.79), the position is set to [All]. • Only the adjusted distance of position setup (position and position DTA values) is stored in memory. Therefore, the final adjustment distance changes if you change the car type set up value (P.79). [2], [3] Adjust the settings of the DTA position. Total DTA The adjusted distance (position and position DTA values), and the total of the distance adjusted by Car type (DTA) setup (P.79) and the adjustment distance for position setup are indicated. 85