Kenwood DNX4280BT User Manual - Page 84
operation, Controlling EQ curves, Controlling SystemQ-Ex, Controlling equalizer manually
![]() |
View all Kenwood DNX4280BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
operation Controlling EQ curves 1 Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], and [User] using [2] and [3]. Controlling SystemQ-Ex Selects items to be adjusted for tone curve setup. If you turn off this setting, only Level can be set up for tone curves. 1 Touch [ON] or [OFF] of [SystemQ-Ex]. Controlling equalizer manually 1 Touch [Tone] in the Equalizer screen. 2 Set each item as follows. Return to the Top page Audio Setting Up LEVEL Adjusts the level of each range. Each setting value is within -8dB and 8dB and default is "0dB." Q Factor Adjust Q value for bass and middle. Setting values are as follows. Bass: 1/1.25/1.5/2 (Default is "1.") Middle: 1/2 (Default is "1.") Bass DC EXT Turns Bass DC EXT on or off. Default is "OFF." If you select "ON", the bass center frequency is extended to the low register by approximately 20%. [Flat] Tone level becomes 0 (flat). Subwoofer Level Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker setup (P.78). FREQ Adjusts the center frequency for each range. Setting values are as follows. Bass: 40Hz/50Hz/60Hz/70Hz/80Hz/100Hz/120 Hz/150Hz (Default is "100Hz.") Middle: 500Hz/1kHz/1.5kHz/2kHz (Default is "1kHz.") Treble: 1 0kHz/12.5kHz/15kHz/17.5kHz (Default is "12.5kHz.") 83
![](/manual_guide/products/kenwood-dnx4280bt-user-manual-28fe82b/84.png)