Kenwood DNX4280BT User Manual - Page 81
Audio Setting Up, You can manually set the sound output, timing of each channel.
View all Kenwood DNX4280BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Return to the Top page Audio Setting Up Speaker location setup 1 In the Car Type screen, touch [Location]. Speaker Location screen appears. 2 Select the speaker locations using [3]. Car type adjust You can manually set the sound output timing of each channel. 1 In the Car Type screen, touch [Adjust]. Car Type Adjust screen appears. 2 Touch the speaker you wish to adjust and set a delay time using [2] and [3] or slider bar. Front Speaker Select the location from "Door"/ "On Dash"/ "Under Dash." Rear Speaker Select the location from "Door"/"Rear Deck", "2nd Row"/"3rd Row" (Minivan, Passenger Van). NOTE • Make fine adjustment of the delay time of the speaker output specified here to have a more suitable environment for your vehicle. • The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker. +100cm 50cm 80cm 150cm +70cm +0cm 80