Kenwood DNX531VBT User Manual - Page 33

Return to the Top page Bluetooth Operation Operations during a call Adjust the receiver volume Bluetooth Setup You can register PIN code, select the device to connect, and perform output setup. 1 Press the button. Switch the voice output Touch [ ] to switch the voice output between phone and speaker. Output the dial tone Touch [DTMF] to display the tone input screen. You can send tones by touching desired keys on the screen. Hands Free screen appears. 2 Touch [BT SETUP]. Bluetooth SETUP screen appears. See the following section for each setting. • Register the PIN code (P.65) • Select the unit to connect (P.60) • Set up output (P.65) 64 Registering Bluetooth unit PIN code You can set the PIN code to the Bluetooth unit. The code is acquired when registering (pairing) from the cell-phone. 1 Touch [SET] of [Receiver PIN Code] in the Bluetooth SETUP screen. Receiver PIN Code Set screen appears. 2 Enter a code number and touch [Enter]. NOTE • If you want to cancel the registration, touch [Cancel]. • If you want to clear the entered number, touch [Clear]. Bluetooth output setup You can select speakers to output the sound from cell-phone (such as phone call voice and ringing tone). 1 Touch [Front Only] or [All] of [Bluetooth HF] in the Bluetooth SETUP screen. Front Only Outputs from the front speakers. All Outputs from all speakers. Return to the Top page Bluetooth Operation Hands-Free Control You can perform various setup about handsfree function. 1 Press the button. Hands Free screen appears. 2 Touch desired key in the Hands Free screen. See the following section for each setting. • Set up the Hands-Free system (P.66) • Set up SMS (P.67) • Preset the phone number (P.69) 65