Kenwood DNX531VBT User Manual - Page 41

Return to the Top page Setting Up Software Information Check the software version of this unit. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Software]. AV Input Setup You can set AV input parameters. 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [Source]. Software Information screen appears. 4 Confirm the software version. Touch [Update] as necessary. 4 Touch [AV-IN SETUP] in the list. AV-IN SETUP screen appears. 5 Set each item as follows. AV Output Interface Setup You can select an AV source to be output at the AV OUTPUT port. Default is "VIDEO1". 1 Touch [Menu] on any screen. 2 Touch [SETUP]. SETUP Menu screen appears. 3 Touch [AV-OUT]. AV-OUT Interface screen appears. 4 Touch [2] or [3] to set [AV-OUT] to VIDEO, DISC, TV , iPod, or OFF. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. • "Vehicle Version" is displayed only when a commercial adaptor is connected. iPod AV Interface Use*1 Sets the terminal which iPod is connected. Setting values are iPod and AV-IN2. Default is "iPod". AV-IN1 Name/AV-IN2 Name*2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port. Default is "VIDEO". *1 T his item can be set when in STANDBY source and also the iPod is disconnected. *2 [AV-IN2 Name] becomes settable when "AV-IN2" is selected in [iPod AV Interface Use]. 80 Return to the Top page Setting Up 81